IMET BS 400 SHI
larger imageMove mouse over the image to magnify

BS 400 SHI

Semiautomatic hydraulic bandsaw, for medium and heavy steelwork, mitre cutting up to 60° left and 45° right.

(01) Mechanical device (position sensor) that allows the saw frame to lower quickly toward the material and detect automatically the start-cut point. Connection element for loading table equipped with roller, 450 mm wide. Slide on the unloading side which can be transformed in connection for unloading table. Adjustable bar stop, blade-cleaning brush, bi-metal blade.

(02) Hydraulic vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping. Easy stops at 0°, 45°, 60° left and 45° right. Adjustment of the blade  tension  from  the  front  side  of the saw-frame, checked by an end-stroke. Blade guides with hard metal pads, additional bearing for blade alignment. Steel saw frame with tubular section, pulleys 360 mm diameter.

Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection, motor absorption device. Possibility to connect a pedal to start the cutting cycle. Floor stand with room inside and  door, removable chip collector, coolant tank and electro pump. Wide working space 460 mm diameter with rotating table integral with the saw frame to avoid incisions of the table, rotation on thrust ring with pre-loaded thrust bearing.

info-2

01495

IMET BS 400 SHI

BANDSAW
Enquire

You might also be interested in ...

 
EX STOCK
 
LOCATION
108G Station Road
(Corner of Marjorie Jayne Cres)
Otahuhu
Auckland 1062
New Zealand
VIEW MAP