www.imetsaws.com

Band sawing machine with adjustable automatic saw frame feed
Manufactured in compliance with E.C. Safety Standards and with the Norms of Electromagnetic Compatibility (EMC).
This model optimizes the operator's time, who can get the band close to the workpiece by hand and then let the cutting operation continue on its own by only adjustyng the saw frame feed speed.
Manual return of the saw frame to initial position.
Suitable for cutting metal profiles and solids (steel, stainless steel, brass, aluminium, copper).

• Saw frame swivels from 60 deg. left to 45 deg. right.
• Cast iron saw frame with tubular section.
• Band tension 1700 kg/cm2.
• Quick location of the worktable - turning on balls - achieved by automatic stops at 60, 45, 0, 45 deg.
• Adjustable tapered roller bearings placed on the hinged pivot pin.
• 320 mm. band wheels.
• Gear reducer in oil bath.
• Hard metal pads inside the band guides.
• New design of the band protection guard, the electric control box and the floor stand.
• Electrohydraulic control with three cutting facilities to be selected by the operator:

A) as a manual machine;
B) manual band approach and cut with hydraulic brake;
C) band approach and cut with gravity feed (adjustable saw frame feed speed and stop at the end of the cut)

• Electrical components complying with E.C. Standards EN60204-1, EN55011, EN50082-2. Low voltage (24V) with start button inside the handle of the control lever.
• Main switch with interlocking attachment and minimum tension coil
• Thermomagnetic overload motor protections
• Emergency stop
• Ammeter for blade motor absorption.
• Stroke-ends on the band protection guard and on the band tensioner
• New floor stand with door and inside opening
• Front adjustable screw vice free to slide transversally on the worktable with quick blocking.
• Fast and positive location at 0 and 45 deg.
• Base with coolant tank and pump
• Supplementary bearing for band alignment
• Adjustable bar stop
• Bi-metal band, wrenches and manual of instructions, maintenance and spare parts.

Technical data

	255 240 300x180 180 160 180x100 210 190 200x160 135 110 130x100
	H= 27 S= 0.9 L. max= 2770 L. min= 2750
	3~ 1-0-2 1.5/1.8 3~ 1 1.5
	35/70 310 348 18÷110