www.imetsaws.com

Semiautomatic electronic band sawing machine in compliance with E.C. Safety Standards and with the Norms of Electromagnetic Compatibility (EMC).
Suitable for cutting metal profiles and solids.
The saw frame swivels from 60 deg. left to 45 deg. right.
Cast iron saw frame with tubular section.

Band tension 1700 kg/cm2.
Quick location of the worktable - turning on balls - achieved by automatic stops at 60,45,0,45 deg.
Adjustable tapered roller bearings placed on the hinged pivot pin
320 mm. band wheels.
Gear reducer in oil bath.
Hard metal pads inside the band guides.
Electrical components complying with E.C. Standards EN60204-1, EN55011, EN50082-2
Low voltage (24V)
Electrical control box, main switch with interlocking attachment and minimum tension coil, thermomagnetic overload motor protections, emergency stop
Floor stand with removable chips collection drawer
Designed for handling with lift truck.
Electronic control; all operating functions of the machine (including the saw frame movements: rapid approach, cut start, cut end) are programmed from the control panel, display of machine conditions by LED lights.
Display of band life, band rotation speed, total cuts, cutting cycle times, motor absorption
AUTODIAGNOSTIC
Front adjustable hydraulic vice free to slide transversally on the worktable with quick blocking
Base with coolant tank and pump
Washing spray gun
Band cleaning brush
Adjustable bar stop
Bi-metal band
Wrenches and manual of instructions, maintenance and spare parts.

Technical data

	230 230 280x150 200 180 200x100 135 95 130x90
	H= 27 S= 0.9 L.max= 2770 L.min.= 2750
	3~ 1-0-2 1.5/1.8 3~ 1 1.5
	35/70 280 420 60
	Auto